SALES & SERVICE
940-612-7180

Fiberglass Tank Trailers

Our custom FRP tank is pound for pound stronger than steel and can be used for various industrial applications, requiring less maintenance and longer durability. DOT – SP 14275
  • 1 Compartment (650 sq.ft.)
  • 5,400 Gallon Capacity
  • 58” Diameter
  • FRP tank that meets dot 412-407 specifications
  • MAWP: 35 psi, Tested to 53.5 psi
  • 20” Quick Opening FRP Manway with 316SS hardware and Viton Gasket
  • FRP Rollover and spillwell at each manway with drain
  • The tank is equipped with all required vents and emergency shut-off valve(s)
  • Standard 5th Wheel configuration with landing gear
  • Dual Axles rated for 25,000 pounds equipped with pneumatic brakes and suspension
  • Steel hub pilot wheels and Low-Profile 275/7OR22.5 Tires
  • All required Safety Placards
  • All tail lights, turn signals, and side marker lights (LED)
  • FRP Fenders with mud flaps
  • Catwalk and access ladder (mounted on customer specified side)
  • Toolbox mounted on driver’s side
  • FRP Hose Trough (mounted on customer specified side)
All piping and butterfly valves are of Schedule 80 CPVC, Poly or FRP-lined steel construction.

All steel is fully sandblasted. The entire exterior is painted with epoxy primer, polyurethane topcoat, and a clear coat finish. Colors to customer specifications.

  • Polished Aluminum Wheels
  • Disk Brakes
  • Catwalk and Ladder constructed of stainless steel
  • Super Single Wheels/Tires
  • Additional Hose Trough can be added
  • Chemical Transfer Pump with Piping
  • See Level Gauge

Single-Compartment-Acid-Transport-FRP-Tank

Our tank is designed with two compartments totaling 5,000 gallons, which is utilized to carry acid to and from well sites and is capable of handling many other oilfield applications. DOT – SP 14275
  • 2 Compartment (325 sq.ft. each)
  • 5,400 Gallon Capacity
  • 58” Diameter
  • FRP tank that meets dot 412-407 specifications
  • MAWP: 35 psi, Tested to 53.5 psi
  • 20” Quick Opening FRP Manway with 316SS hardware, Viton Gasket (1 per compartment)
  • FRP Rollover and spillwell at each manway with drain
  • The tank is equipped with all required vents and emergency shut-off valve(s)
  • Standard 5th Wheel configuration with landing gear
  • Dual Axles rated for 25,000 pounds equipped with pneumatic brakes and suspension
  • Steel hub pilot wheels and Low-Profile 275/7OR22.5 Tires
  • All required Safety Placards
  • All tail lights, turn signals, and side marker lights (LED)
  • FRP Fenders with mud flaps
  • Catwalk and access ladder (mounted on customer specified side)
  • Toolbox mounted on driver’s side
  • FRP Hose Trough (mounted on customer specified side)
All piping and butterfly valves are of Schedule 80 CPVC, UHMW Polyethylene pipe, or FRP-lined steel construction.
All steel is fully sandblasted. The entire exterior is painted with epoxy primer, polyurethane topcoat, and a clear coat finish. Colors to customer specifications.
  • Polished Aluminum Wheels
  • Disk Brakes
  • Catwalk and Ladder constructed of stainless steel
  • Super Single Wheels/Tires
  • Additional Hose Trough can be added
  • Chemical Transfer Pump with Piping
  • See Level Gauge

Dual Compartment Acid Transport FRP Tank

Our tank is designed with two compartments totaling 5,000 gallons, which is utilized to carry acid to and from well sites and is capable of handling many other oilfield applications.
  • 2 Compartment (325 sq.ft. each)
  • 5,400 Gallon Capacity
  • 58” Diameter
  • Fiberglass-lined welded steel tank; meets dot 412-407 specifications
  • MAWP: 15 psi, Tested to 22.5 psi
  • 20” Quick Opening FRP Manway with 316Ss hardware, Viton gasket (1 per compartment)
  • FRP catch pan at each manway with drain
  • Four (4) Welded steel roll-over protections
  • The tank is equipped with all required vents and emergency shut-off valve(s)
  • Standard 5th Wheel configuration with landing gear
  • Dual Axles rated for 25,000 pounds equipped with pneumatic brakes and suspension
  • Steel hub pilot wheels and Low-Profile 275/7OR22.5 Tires
  • All required Safety Placards
  • All tail lights, turn signals, and side marker lights (LED)
  • FRP Fenders with mud flaps
  • Catwalk and access ladder (mounted on customer specified side)
  • Toolbox mounted on driver’s side
  • FRP Hose Trough (mounted on customer specified side)
All piping and butterfly valves are of Schedule 80 CPVC, UHMW Polyethylene pipe, or FRP-lined steel construction.
All steel is fully sandblasted. The entire exterior is painted with epoxy primer, polyurethane topcoat, and a clear coat finish. Colors to customer specifications.
  • Polished Aluminum Wheels
  • Disk Brakes
  • Catwalk and Ladder constructed of stainless steel
  • Super Single Wheels/Tires
  • Additional Hose Trough can be added
  • Single Compartment available
  • Chemical Transfer Pump with Piping
  • See Level Gauge

Dual Compartment Acid transport Steel tank With FRP Lining

FRP Chemical Storage Tanks

Our FRP Chemical Storage tank is to be used at frac sites, groundwater remediation projects, or other temporary applications. It has a capacity of 358 barrels (15,000 gallons) and is capable of transferring up to 30 bbl/min. The tank is designed to safely store HCL acid with concentrations of up to 37%.

358 Barrel Capacity
96” Diameter
MAWP: 8 psi, Tested to 8 psi
20” FRP Quick Opening Manway with 316SS hardware

Standard 5th wheel configuration with self-contained DC powered hydraulic lift system
Single Axle rated for 25,000 pounds equipped with pneumatic brakes and suspension
Steel hub pilot wheels and Low-Profile 275/7OR22.5 Tires
All LED tail lights, turn signals, and side marker lights (LED)
Catwalk and access ladder (mounted on rear of trailer)

All piping and butterfly valves are of Schedule 80 pvc, UHMW Polyethylene pipe, or FRP-lined steel construction
Garnet See Level Gauge is capable of showing capacity in gallons or barrels
The tank is equipped with 3” Fill Line and a 4” Vent Valve
The discharge is a 6” suction line feeding an 8” manifold with three (3) 4” valves

All steel is fully sandblasted. The entire exterior is painted with epoxy primer, polyurethane topcoat, and a clear coat finish. Colors to customer specifications.

Polished Aluminum Wheels
Custom Piping Arrangements

product-frp-chemical-storage-tank

Fiberglass Manways

20 Inch Fiberglass Manway

Hawk FRP quick-opening manways will replace carbon and stainless steel manways for use on all makes of tank trailers AND STORAGE CONTAINERS. Our manways resist corrosion created by hazardous waste, chemical products, and acids without the deterioration problems of STEEL manways. Hawk FRP manways are low maintenance and can be adapted to your current tank trailer fleet.

DOT – SP 13327

  • FRP Composite Dot – SP 13327 approved manway
  • 60 psi Test Pressure
  • All hardware is of 316 stainless steel

10 Inch Fiberglass Manway

Hawk FRP quick-opening manways will replace carbon and stainless steel manways for use on all makes of tank trailers AND STORAGE CONTAINERS. Our manways resist corrosion created by hazardous waste, chemical products, and acids without the deterioration problems of STEEL manways. Hawk FRP manways are low maintenance and can be adapted to your current tank trailer fleet.

DOT – SP 13327

  • FRP Composite Dot – SP 13327 approved manway
  • 60 psi Test Pressure
  • All hardware is of 316 stainless steel

015_15-filtered

Hawk FRP quick-opening manways will replace carbon and stainless steel manways for use on all makes of tank trailers AND STORAGE CONTAINERS. Our manways resist corrosion created by hazardous waste, chemical products, and acids without the deterioration problems of STEEL manways. Hawk FRP manways are low maintenance and can be adapted to your current tank trailer fleet.

DOT – SP 13327

  • FRP Composite Dot – SP 13327 approved manway
  • 60 psi Test Pressure
  • All hardware is of 316 stainless steel

008_8

Hawk FRP quick-opening manways will replace carbon and stainless steel manways for use on all makes of tank trailers AND STORAGE CONTAINERS. Our manways resist corrosion created by hazardous waste, chemical products, and acids without the deterioration problems of STEEL manways. Hawk FRP manways are low maintenance and can be adapted to your current tank trailer fleet.

DOT – SP 13327

  • FRP Composite Dot – SP 13327 approved manway
  • 60 psi Test Pressure
  • All hardware is of 316 stainless steel

012_12-filtered

Hose Troughs & Fenders

Light Weight. Strong as Steel.

  • Dimensions: 18” W x 6” D
  • Maximum length 28 ft
  • Hose Trough Lids available
  • Custom FRP Hose Troughs available

DSCN1410A 1410a

Light Weight. Strong as Steel.

  • FRP constructed with smooth finish
  • Corrosion resistant
  • Replaces stainless, carbon steel, and aluminum fenders

product-FRP-fender

More Products

Hawk FRP has Flanged Hose Barbs manufactured from high quality materials and resins in a variety of sizes ranging from 2″ to 6″.  Each and every item is individually inspected and must meet Hawk FRP’s quality requirements.

FRP Hose Barb Flanges (2 to 6 Inch)

Hawk FRP has EPDM and Viton seals and O-ring made to their stringent specifications.

Gaskets (EPDM or Viton)

Hawk FRP offers Garnet brand See Level Gauges.

  • Provides an accurate digital readout of the amount of fluid in a trailer tank
  • Microprocessor-based technology provides a resolution of 1/3″
  • Readout provided on a daytime viewable LCD display suitable for inside or outside mounting with a back light for night viewing

See Level Gauges

Hawk FRP is proud to provide  GIRARD Vent Valves, made in the USA.  We stock vent valves in a variety of pressure ratings.

Vent Valves